The position of office furniture should not be exposed to direct sunlight. Frequent exposure to the sun will make the paint film fade, and the metal parts are easy to be oxidized and deteriorated, and the wood is easy to be brittle. In summer, it's best to use curtains to protect office furniture.

The floor where the panel furniture is placed must be kept flat and the four legs should be balanced. If the furniture is in a state of frequent shaking after placement, the tenon or fastener will fall off and the bonding part will crack over time, which will affect the use effect and reduce the service life of the furniture.

In addition, if the floor is soft and makes the furniture unbalanced, don't use wood or iron to pad the legs of the furniture. Even if you keep the balance, it's hard to have even force. If it goes on for a long time, it will damage the internal structure of the furniture. The only way to compensate is to trim the floor, or use a slightly large area of hard rubber board to lay on the floor, so as to make the four legs of the office furniture land smoothly.

Before cleaning furniture, you should first use soft cleaners such as chicken feather duster and cotton knitted cloth to remove dust from the surface. Use a fine soft wool brush to remove the dust from the concave or relief patterns, and then gently wipe it with a soft cloth. You can dip in a small amount of water or an appropriate amount of detergent to clean it. The furniture that passes paint processing, avoid to use gasoline or organic solvent to wipe, can use colorless furniture to polish wax to wipe, in order to enhance luster, reduce fall dust

Hardware decoration (including gold plating) parts only need to be treated with dry rag gently, do not use detergent containing chemical substances, and do not use acidic liquid to clean gold plating parts. If black spots appear on the surface of gold plating parts, kerosene can be used to wipe and clean them.

Keep the humidity in the room. Don't let the furniture get damp. Use humidifier in spring and autumn should be limited time, to prevent excessive humidity and damage to furniture, such as wood decay, metal corrosion, adhesive parts easy to break off, etc.